NEW PRODUCTS!

 

LT855 Texas Twister Air Hammer Pulling Kit
LT-855


  • Now you can convert your air hammer into a pneumatic slide hammer with the Texas Twister.
  • Simply snap the Texas Twister curved air bit into the collet of your hammer with one of the bits attached and reverse the air hammer handle in your hand now using thumb to push the hammer trigger.
  • Feel the 3000 air hammer blows per minute tuning into new pulling power.
  • One hand operation allows you to hold parts with your other hand.
  • Safe controlled part removal without parts and fluids crashing to the floor.
  • Use 21st century air hammer pulling power to get the job done SAFE, FAST & EFFICIENT instead of a slow, manually powered 19th century slide hammer.
  • Extend the reach of the tool by using the 20” extension.
  • Use the double ended female ½-20 connector bar to connect the Texas Twister to your current pullers.
  • NEW PART ADDED - Use the double ended male ½-20 to 5/8”-18 connector bar to connect the Texas Twister to your 5/8” slide hammer bits and 5/8” pullers
  • Safe, powerful, fast, simple effective air hammer bits you will use every day.
  • Comes packaged in a custom ballistic black nylon case.
  • Patent #7,036,211

LT855

Click / Scan the above for Video
LT4180 MERCEDES “A” WHEEL LOCK MASTER KEY SET
LT-4180
  • 30 piece kit works 2006-present MERCEDES factory wheel lug nut locks
  • Factory duplicate - uses same factory part numbers
  • NO WARRANTY - CAN’T BE USED WITH AN IMPACT GUN
  • NOTE: The MERCEDES “B” set is the same as the LTILT4165 BMW kit shown below. The two kits together will work on all MERCEDES vehicles
LT4175 Audi Wheel Master Lock Set
LT-4175


  • The LT4175 is a 20 piece factory duplicate master wheel lock key set for the removal of 2006-2016 Audi factory wheel lugnut locks
  • Identical to factory set - uses same factory part numbers.
  • Comes packaged in a custom blow molded carrying case.

LT4170 Porsche Wheel Master Lock Set
LT-4170


  • The LT4170 is a 20 piece factory duplicate master wheel lock key set for the removal of 2006-2016 Porsche factory wheel lugnut locks.
  • Identical to factory set - uses same factory part numbers.
  • Comes packaged in a custom blow molded carrying case.

LT4165 BMW 2nd Generation Wheel Lock Master Key Set
LT-4165



  • 20 piece wheel lock master key set
  • Removes all 2nd generation 2012-present BMW wheel lugnut locks
  • Identical to factory set - uses same factory part numbers
  • Comes packaged in a custom blow molded case
LT4160 BMW Wheel Lock Bolt Kit
LT-146



  • Duplicate factory lugnut keys
  • 21 Piece BMW kit fits all internal spline drive locks
  • Includes anti-scratch nylon sleeved installer sockete

LT4155 VW/Audi 2nd Generation Wheel Lock Master Key Set
LT-4155


  • 20 piece wheel lock master key set
  • Removes all 2nd generation 2012-present VW/Audi factory wheel lugnut locks
  • Identical to factory set - uses same factory part numbers
  • Comes packaged in a custom blow molded case
LT4150 VW/Audi Wheel Lock Key Kit
LT-4150



  • 23 piece factory reproduced master wheel lugnut key/bolt kit
  • Works on all VW/Audi factory wheel lugnut locks
  • 22 piece splined lugnut bolts with nylon sleeved ½”drive 17mm drive socket
  • Priced at a fraction of factory supplied kit
LT-1800 Offset Impact Driver Set
  • Offset 15? angle for greater access in tight areas
  • Recessed non-turning head well prevents driver slipping off stud or fastener
  • Extra-long extra heavy non-turning straight hammer won’t rotate off stud
  • Great for strut work, hub work, front end, exhaust, spring and suspension repair
  • Comes packaged in a heavy duty cordura nylon roll-up storage bag
  • Patent pending

  • 4 piece set includes:

         410 – Offset Shaft Impact Driver
         530 – Offset Shaft Impact Driver
         725 – Offset Shaft Impact Driver
         990 – Straight Shaft Impact Driver
LT1810 Offset Impact Driver Starter Set
LT-1810


  • 725 driver has 15° offset .812 machined recessed well head to capture hard to reach bolts (Dodge hub bolts). Non-turning slots..
  • 990 short straight 1” hammer head driver won’t rotate off bolt/work area with non-turning slots.
  • Great for strut work, hub work, front end, exhaust, spring and suspension repair.
  • Comes packaged in a heavy duty roll-up cordura nylon storage bag.

LT1820 3 Piece Offset Impact Driver Starter Set
LT-1820


  • 725 driver has 15° offset .812 machined recessed well head to capture hard to reach bolts (Dodge hub bolts). Non-turning slots.
  • 990 short straight 1” hammer head driver won’t rotate off bolt/work area with non-turning slots.
  • Great for strut work, hub work, front end, exhaust, spring and suspension repair.
  • Comes packaged in a heavy duty roll-up cordura nylon storage bag.

LT1830 2 Piece Non-Turning Hammer/ Impact Hammer Driver Set
LT-1830


  • 990 straight 8” long non-turning slotted air hammer and 990SHT straight 6" short non-turning slotted air
  • Non-turning machined slots won't rotate off work
  • Comes packaged in a heavy duty roll-up cordura nylon storage bag.

LT895 Eaton Truck Brake Spring Tool
LT-895


  • The LT895 easily installs Eaton air brake shoe anchor springs.
  • Universal fit for all Eaton air brake shoe anchor springs.
  • FAST - EASY - SAFE

LT890 Truck Brake Spring Tool
LT-890

  • Easily connects rear drum brake return springs
  • Easy one hand operation
  • Slotted ends on tool always hold spring at correct work angle
  • No need to leverage tool against a solid surface during spring
    installation
  • FAST    EASY    SAFE
LT-890

Click / Scan the above for Video
LT1350 Lug Ripper II
LT-1350
LT-1350


  • Don't torch damaged/frozen lugnuts off just drill out the lugnut/stud threads only in 11 minutes or less without damaging rim
  • Easily replace damaged lug nut/stud with threads now removed
  • Doesn’t drill out the whole lug nut - just the threads
  • Available NOW from your local mobile tool dealer/distributor
  • 16mm Tungsten steel drill bit w/4 carbide cutters allow for speed & durability
  • Comes with a locking collar clamp for safety
  • Includes 4 drill guides
  • Packaged in a custom blow molded case
  • Patent Pending

                                          Play Movie

LT830A Universal Hub Shocker Wheel Bearing Hub Removal Tool
LT-830A
LT-830



  • Safely remove all frozen hubs instantly
  • Universal fit mounts to all axle bolted hubs - 5, 6 & 8 lug hubs
  • Mounts to two studs using supplied flanged nuts in seconds
  • Use with 5 lb. hammer to knock frozen hubs out of axles
  • Flanged nuts included for improved safety and performance
  • Ideal for Dodge and other HD trucks
  • Two mounting holes in 3/4” steel back plate
  • 1/4” steel square tubing and striking plate
  • Will not damage axle
LT4980 12 Point Socket Euro/Asian Axle Nut Kit
Audi - BMW - Mercedes - VW - Lexus - Toyota
LT-4980



  • 4 - 12 point ½”drive molybdenum impact sockets -
    24mm
    30mm
    32mm
    36mm
  • Convenient packaged dedicated German/Asian axle nut kit
LT4990 5 Socket Euro Specialty Axle Nut Kit   AUDI - VW - MERCEDES ML
LT-4990



  • Easy to use dedicated kit for German vehicle axle nuts
  • M18 ½”drive chrome molybdenum impact socket for rear wheel bearing assemblies on
    VW Golf/Jetta and other M/C 5 chassis for VW/Audi
  • E24 ½”drive chrome molybdenum impact socket for Mercedes ML axles
  • 19mm - 17mm - 14mm ½”hex drive sockets for internal drive axle nuts on Audi/VW vehicles
LT825D Roller Rod Paintless Dent Removal Kit
LT-845



  • Roller rod paintless dent removal technology
  • Finally a PDR made easy for you to master
  • Seven interchangeable tips and five stainless steel rods
  • 35 rod & tip combinations
  • Includes a get started training DVD
  • Custom blow molded carrying case
  • A new PDR profit center for any auto tech
LT845 Tire Wheel Weight Hammer
LT-845



  • “Patent Pending” hammer inside a hammer design
  • No more pinched fingers
  • Cock and fire inside hammer to mount wheel weight hands free
  • Non marring nylon & aluminum tips
  • Spring loaded clip removes any size wheel weight
LT993 Brake Line/Brake Cylinder Fitting Re-Threading Kit
LT-146



  • Rethread damaged male and female brake fittings
  • Compact dual design male/female combo sockets
  • Rethread damaged brake fitting on vehicle
  • Works on vehicles where standard tap & dies won’t fit
  • Quick and easy applications on car
  • Most common sizes - 3/8 - 24
         7/16 - 24
         1/2 - 20
         5/8 - 18
         10mm - 1.0
         12mm - 1.0
LT146 Quick Connect Lockout Kit
LT-146

LT-146QD



  • Snap and lock design
  • Fast quick connect assembly
  • Will not come apart during use
  • 3 Piece Kit – Adjustable
      * 33” reach with Handle Rod and 7” Tip Rod
      * 53” reach with Handle Rod and 28½” Tip Rod
  • Kit also includes
      * LT275 – Inflate-A-Wedge ™
      * LT-100 – Plastic Slip Jim
      * LT271 – Plastic Wedge (2)

  • As an add-on to the LT146 kit there is a 15” Extension Rod available


LT599 9 Piece Metric Shockit Socket Kit
LT-599
  • Shock loose frozen nuts and bolts
  • Ideal for hard to reach work areas
  • Custom punch designed for air hammer use
  • Includes 9 popular metric sizes
      10mm - 11mm - 12mm
      13mm - 14mm - 15mm
      16mm - 17mm - 19mm
  • Custom see-through blow molded case

LT-960 Dual Tire Inflatorl
LT-960

  • Two four foot hoses with lock-on air chucks
  • The pre-settable regulator/gauge allows the user to "Set-It & Forget It"
  • Allows the user to inflate two tires at a time automatically
  • Ideal for large truck tires